Easy Door Makeover

Painted door with new hardware

I have 11 interior flat hollow core doors in my old house.  Some have been painted and repainted, others still in their 50+ year original varnish, most with grungy brass hinges and door knobs.  Paying someone to come in and replace all the doors and hardware was not an option, what can I say, I’m frugal! I thought it was wasteful to throw the doors away.  I didn’t want to just paint them white—boring.  I wanted them to be lighter in color than the original varnished doors, so I had to come up with another solution.  I decided to test paint one door with a simulated wood pattern.  I gave it shot and I'm quite happy with the result.  Below are some pictures and information on my project.

Old varnished door

Newly painted door matched to floor and furnishings

The following is to give you an idea of the process, how easy it is and inspire you to try it!  I still have four doors to go and when I start up again in Spring, I will take pictures along the way so I can show you how I mixed the paints and created the grain pattern.  For this post, I created some illustrations since I didn't take pictures during the project.

Materials List

Here is a list of the types of materials needed and some idea of what they cost. I've added links so you can peek at them.

• 2 Pack Hinges (satin nickel finish) $6
• Lever Door Handle (satin nickel finish) Schlage, Kwikset $20-$25
• Latex Wall Paint (leftover white) 1 quart is more than enough
• Plaid Folk Art Acrylic Paint  ($1.00-1.50 each)
1. Yellow ochre
2. Red
3. Raw Sienna

• Stiff bristled paint brush (old crusty one for creating grain lines works great)
• Foam Sponge Paint Brushes
• Synthetic Brush to apply Finish
• Paper Towels
• Cotton Swabs
• Water to Thin Paint
• Sandpaper/sanding block about $6 each ( I have a palm sander, but these will work)

1.      60 Grit
2.      100 Grit

• Low VOC  Poly Acrylic Satin Finish (one quart was enough to coat 5 doors with 2 coats each side or 20 coats total) $15
• Floor Sample (I used this to guide me in mixing my paint colors)
• Screw Driver (for removing and installing hardware)
• Saw Horses (or something else to lay your door on)

These are the steps:

1.  sand door to rough up surface so paint will stick

2.  tint white latex paint with small amount of red and yellow ochre acrylic paint and apply 2 coats to door

3.  mix 3 colors of paint for creating the pattern, all these need to be very watery

• "grain" – mix yellow ochre and small amount of red in to separate container of diluted base.  This color needs to be strong as it will be blended after application and washed over with another paint

• “wash” for entire door –  add yellow ochre into separate container of diluted base, should be semi-transparent

• “dark accents” – dilute small amount of raw sienna in water only, should be semi-transparent

4. starting at the ends of the door,  drag long stripes of “grain” paint with a stiff brush keeping the lines long and thin and smooth them out with a damp sponge brush to soften edges. 

5.  apply “wash” with a wide foam sponge brush over entire door, don't over work.  The mix should not be so watery that it puddles as this will create noticeable spots.  If this happens, wipe excess with a dry foam brush. 

6.  add “dark accents” with cotton swab and smooth out with damp foam sponge brush

7.  apply two coats of finish per manufacturer's instruction

8.  install hinges

9. re-hang door

10.  install new handle

2 coats base paint

"grain" start at edges

apply thin "wash"

add "dark accents"

Tips: 

• Fill holes and dents in the door with a wood putty after sanding, sand dried putty before painting 
• You may want to tint a primer for the base coat, use a small amount of red and yellow ochre acrylic to tint
• If you are starting with a white painted door, one coat of base is sufficient
• Find a swatch, sample or piece of wood or furniture that you want to simulate and use it as a guide to mix your colors
• Mix all your colors and test them on a piece of scrap wood or heavy cardboard
• Use old margerine/deli type plastic containers to store the paints
• Swirl your paint mixes before use as the pigment will separate and settle when not in use
• Use a flat bottomed open container for the “grain” paint and barely dip the edge of the brush in it.  Have a paper towel ready if you get too much paint on the brush and tap it on the paper towel.  DON’T rinse this brush under water as it will stay too wet to work with.
• When applying grain and washes, work in long strokes from top to bottom of door as much as possible
• Make sure your door is dry before going on to the next coat/application –dry with hair dryer to speed it up but be careful, if your paint is too fluid, the air will push it around creating a pattern
• ALWAYS have paper towels and a damp sponge brush ready during the painting process.
• Squeeze sponge brush between paper towels to dry the brush out.  Rinse in water if you pick up too much pigment.
• Use washes to even out or adjust the appearance of the door
• If you aren’t happy with the way your door came out, DON’T APPLY THE FINISH.  Repaint the door in the base coat and start over.
• Rotate doors as you are doing each step so they come out looking the same.  I had 3 bedroom doors in the same hallway and I wanted them to look identical. I placed an old towel on the floor and leaned the additional doors up against the wall as I worked on the other.
• Test your finish (product) before application – the second product I purchased was semi-glossy, not really satin as advertised.

Get creative!  Explore the possibilities!  Be Inspired!

Though the doors throughout the house were all finished alike, I found this a bit monotonous and chose to mix it up.  I decided on black for the closet doors, the linen closet/drawers and shelf in the entry way.  The bedroom doors (in the hallway pictured below) were painted to match the floor and furnishings.

I would like to try this technique on a piece of furniture like a dresser or a night stand.

Eclectic style - classic patterned rugs and floors blend with fresh clean colors and lines

Refurbishing Old Doors - Don't Toss 'em, Fix 'em up!

I posted this sometime ago and I am revisiting my blog with the intention of keeping it current. In the next week or so,  I am going to write the steps used to refurbish these doors with a price estimate of what I paid for the materials and hardware.  I still have some doors to do and there are others I've done since...I will add photos of the finished ones and take pictures of the technique I use on the next ones.

before and after swatches

before and after

close up with new hardware

Installing Floating Floors - 1000 Square Feet in 5 Weekends

 

I had 50+ year old hardwood floors in my home and they had seen better days.  They were unsightly!  The living room, hallway and foyer were once carpeted and the perimeters had noticeable nail holes.  The floors had dents, gouges, stains and gaps.  The wooden baseboards in some areas contained rug fibers stuck to the paint.

My first thought was to refinish them.  That presented a number of issues.  Where are we going to put all the furniture and stuff from four rooms?  Could we survive being in our home during the process (we both suffer allergies).  There was only so much a refinisher could do and one of the things I really wanted was lighter floors, and the floors would not be much lighter than the currently were. 

The other option was to cover them with a new product.  I could have a new hardwood floor floated over the old one.  But did I really want hardwood?  How practical was that for us?  Accidents happen in our house.  I needed a floor that could take a beating.  I dreaded the thought of maintaining that much wood flooring.  Bamboo flooring was out of my budget.  That left me with laminate.  I called my contractor and ask him to give me a quote and he came back with $7000.  I slept on it…for about 2 years.

Can I do this?  I can do it!

I wondered if I could install the flooring myself.  I had experience installing vinyl tile on two separate occasions and I did a pretty darn good job.  I went and researched installing laminate flooring.  The major tools I would need were a miter and circular saw.  I knew I could borrow those from a friend.  I had never used them, but how hard could it be?  I went on line to various sites to see what the laminate floor options were.  I found iFloors.com and found a wide variety of styles, colors, quality and prices.  They also offered free samples.  I gave myself a budget of $2000 for the laminate and narrowed my choice to four (samples).  The samples came and I gave myself a week to make a decision.  

Making a Decision – Which Floor Product?

I mulled over the choices.  The color I thought I would like best was too light and it looked unnatural.  A couple of the samples had a pattern simulating multi-plank wood flooring, but the surface was flat and the seams (which would be visible especially at an angle) also looked unnatural.  I ended up selecting a style where one piece represented one plank of wood and the surface was embossed to look like wood grain. There were at least 3 unique patterns to this style so that it could be laid in varying configurations to mix up the pattern and not detect the repetition.  The color was lighter than my current hardwood floor and the style meshed well with the other elements of architecture in my home.  The padding was already attached to the underside of the flooring—I intentionally looked for this as I did not want to lay rolls of cushioning material. ( Beware that some underlayments have a strong odor.)

I ordered the flooring, the flat delivery rate was reasonable  There was an option to have it delivered to a local business for free, but reloading and unloading that amount of heavy material wasn’t worth saving $99.  We had it delivered to the house.  The transaction went smoothly and the delivery timely.  There were a couple boxes with damaged corners and the merchant replaced them with no hassle.

Getting to Work

There was no question this was going to be a lot of work.  It wasn’t that it would be so hard, but it was going to take time and patience.  First, I removed the doors and pulled all the baseboards.  With a Sharpie pen, I wrote the origin/ location of each piece (door ends and the backs of the baseboards).  I used a nipper/plier tool like the KR nipper Pliers to pull the nails out of the back of the baseboards.  (I decided on reinstalling the baseboards after a little sanding and repainting.)    There were too many door jambs to cut by hand (10 in all), so I invested in a Bosch undercut saw.  It’s a nifty little basic saw I can use for other projects in the future.  My friend lent me his floor installation kit which contains some basic tools you need…spacers, pull bar and a tapping block (Harbor Freight has a kit for $6).  I already had the other basic hand tools.

Planning the Layout – Executing the Plan

The original hardwood floor was continuous with no thresholds.  It flowed through five distinct rooms and areas.  This had to be true of the new floor.  I really couldn’t find any information to guide me on this so I thought it through carefully and decided I needed to start with the master bedroom, work into the hallway and then into the bedroom on the other side of the hall way.  It was not possible to lock in the plank at the threshold, so I scraped the edge of the plank, applied wood glue and slid in the plank on the hallway side. I made sure to secure the planks so they would not separate until they had thoroughly dried.  I took heed and made sure that the planks along the wall of the master bedroom would be no narrower than 2”.  I did some basic math to ensure that once I made it across the hall and into the adjacent bedroom, there would be a plank width at least or great than 2”.   The rest of the installation measured out accordingly. 

The baseboard

There were a lot of pieces of baseboard.  I used empty laminate boxes to collect some of the smaller pieces.  Somewhere in between installing the floor and painting rooms, I sanded all the baseboards on my patio using one of the doors covered in newspaper set on top of two saw horses—as a table.  I moved the operation inside, into the living room to do the painting.  I used evenings to put on a coat of paint and let it dry overnight.  Reinstalling the baseboard was easy, I could see the indentations where the nail holes were and I placed nails in all the holes (once piece of board at a time) and nailed it back up to the wall.  I used a “nail set” to counter sink the nail and then filled the depressions with a caulk, wiping off the excess with a damp rag.  I went back and touched up the baseboard with a little paint.

What I learned!

Everything went well with the installation.  I am very happy with the result.  I did find early on, when I completed the master bedroom, that for the style of  floor I used, it is important to vary the length of the board so the seams aren’t predictable.  This gives the appearance of a more natural wood floor.  I already laid the floor when I noticed this, but fortunately once the bed went in, it wasn’t visibly obvious.

I hope after reading this you will be inspired and have the confidence to install your own floating floor.  If an inexperienced person like me can do it anyone who has the patience and takes the time to follow the instructions can do it!